天博体育

产品-标准编号

当前位置:首页>产品-标准编号

BS EN 1728:2012 Domestic furniture Beds and mattresses Safety requirements and test methods

时间:2020-09-18   访问量:1047
BS EN 1728:2012 Domestic furniture Beds and mattresses Safety requirements and test methods
Edition: 20200621 更新 
SectionSection DescriptionSummary of important content重要内容摘要
NAForeword1. All test methods for seating used in European Standards for furniture have been collated in one document.
2. The document now contains methods that were previously listed in EN 581-2, Outdoor furniture, EN 1335-3, Office work chair, and EN 15373, Non-domestic seating.
1. 本标准汇集了欧标所有有关家具坐具类产品的检测标准。
2. 本标准替代了原 EN 581-2 (户外家具)、EN 1335-3(办公椅)和EN 15373(非家用座椅)标准。
1ScopeThis European Standard does not apply to children’s highchairs, table mounted chairs and bath seats which are covered by other European Standards.本标准不适用于儿童用高椅、附着在桌子边上的婴儿坐具及沐浴类坐具。
2Normative referencesNA 
3Terms and definitionsNA 
4General test conditions1. Unless otherwise stated, static forces shall be maintained for (10±2) s.
2. Unless otherwise stated, durability forces shall be maintained for(2±1)s;
1. 除非特别说明,强度测试时力值保持时间为10±2秒。
2. 除非特别说明,耐久试验时力值保持时间为2±1秒。
5Test equipment and apparatus1. The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of the unit/component during testing.
2. All loading pads shall be capable of pivoting in relation to the direction of the applied force.
3. If a loading pad tends to slide, use a slip resistant material between the loading pad and the foam for loading pads (5.8)
1. 测试设备不应该限制被测试样品的在受力状态下的自然变形,换句话说,即测试设备应该跟随被测试样品的变形做出响应的调节。
2. 所有加载垫应该配置活动关节,以便保持加载点的位置和加载方向不变;
3. (在加载过程中)如果加载点的位置不能保持,可以在加载垫和加载海绵之间垫衬防滑材料。
SectionSection Description章节内容KW ModelKW Model Desc产品名称图片资料下载操作视频
5Test equipment and apparatus检测设备和仪器NA//   
5.1Loading point template加载垫定位模板KW-BSE-09Seat Loading Point Template欧标坐具加载点模板

 
5.2Floor(测试)地面KW-BSE-29Rubber Sheet for Furniture Drop Test欧标跌落测试地板

1600407460792776.jpg

 
5.3Stops(样品)阻挡块KW-BSE-02Stopper挡块(厚度小于12毫米)

 
5.4Seat loading pad座面加载垫KW-BSE-01Seat Loading Pad (Hard Wood) 大屁股加载垫(硬木)

 
5.5Smaller seat loading pad小座面加载垫KW-BSE-03Small Seat Loading Pad 小屁股加载垫

 
5.6Back loading pad(坐具)靠背加载垫KW-BSE-05Back Loading Pad坐具靠背加载垫

1600407696656120.jpg

 
5.7Local loading pad一般性加载垫KW-BSE-04-SPLocal Loading Pad - Universal普通加载垫-万向(加弹簧)

 
5.8Foam for use with loading pads加载垫垫衬海绵KW-BSE-08-1010mm PU Foam for Test Seat loading Pads10毫米坐具测试加载海绵衬垫

1600407744824958.jpg

 
KW-BSE-08-2525mm PU Foam for Use with Seat Loading Pads25毫米坐具测试加载海绵衬垫

1600407759346894.jpg

 
5.9Seat impactor座面冲击器KW-BSE-11-BSSeating Impacter欧标坐具冲击器

 
5.10Impact hammer冲击锤KW-BSE-22Hammer impact test for furniture坐具冲击摆锤

1600407838126452.jpg

 
5.11Arm rest durability test apparatus(坐具)扶手测试设备KW-BSE-16Arm rest tester坐具扶手试验机

 
5.12Test surface for castor testing(坐具)脚轮测试地面NA//


  
5.13Test weights drop test(坐具)跌落测试加载砝码KW-BFM-05-MSChair Rear Stability Test Disc坐具后稳定性测试加载模块

 
6Chairs Other than Work Chairs  坐具 - 非办公椅坐具
6.2 Determination of seat and back loading points(坐具)座面和靠背加载点定位KW-BSE-09Seat Loading Point Template欧标坐具加载点模板

 
6.3Determination of Back Angle(坐具)靠背(后倾)角度测量KW-BSE-09Seat Loading Point Template欧标坐具加载点模板

 
KW-86Angle Gauge倾角测试仪

1600407965165289.jpg

 
6.4Seat static load and    back static load test (坐具)座面和靠背强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-23Seat and Back Bending Tester单座位坐背联合测试机

1600408046503426.jpg

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.5Seat Front Edge Static Load(坐具)座面前边沿强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.6Vertical load on back rests(坐具)靠背垂直强度测试KW-BSE-17Universal    test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.7Horizontal forward static load test on back rests(坐具)靠背水平向前强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.8Foot rest static load test(坐具)脚踏(垂直)强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
6.9Leg rest static load test(坐具)垫脚(垂直)强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
6.10Arm rest sideways static load test(坐具)扶手水平侧拉强度测试KW-BSE-16Arm rest tester坐具扶手试验机

 
6.11Arm rest downwards static load test(坐具)扶手垂直下压强度测试KW-BSE-16Arm rest tester坐具扶手试验机

 
6.12Headrest static load test(坐具)头枕强度测试KW-BSE-24 Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
6.13Vertical upwards static load on arm rests扶手提起(坐具)强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
KW-BFM-11Seating Impact Tester 座面冲击测试机

 
6.14Vertical static load on auxiliary writing surfaces(坐具附带的)写字板垂直强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
6.15Leg forward static load test坐具前推的腿强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.16Leg sideways static load test 坐具侧推的腿强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.17Combined seat and back durability test(坐具)座背联合耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-23Seat and Back Bending Tester单座位坐背联合测试机

1600408046503426.jpg

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.18Seat front edge durability test(坐具)前边沿耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-16Arm rest tester坐具扶手试验机

 
6.19Durability test on seating with a multi-position back rest(坐具)靠背可调的后倾机构耐久测试KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.20Arm rest durability test(坐具)扶手耐久测试KW-BSE-16Arm rest tester坐具扶手试验机

 
6.21Foot rest durability test(坐具)脚踏耐久测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
6.22Auxiliary writing surfaces durability test(坐具附带的)写字板耐久测试KW-BSE-16Arm rest tester坐具扶手试验机

 
6.23Tipping seat operation(影院坐具)座面翻转耐久测试KW-GBF-16Public tipping seat operation tester公共座椅座面翻转耐久试验机

1600412519609216.jpg

 
6.24Seat impact test(坐具)座面冲击测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-11Seating Impact Tester座面冲击测试机

 
KW-GBF-32Universal drop or impact test for finished furiture test rig 家具综合冲击(跌落)试验台

1600412381155436.jpg

 
6.25Back impact test(坐具)靠背锤击测试KW-BSE-22Hammer impact test for furniture坐具冲击摆锤

1600407838126452.jpg

 
6.26Arm rest impact test(坐具)扶手(侧向)锤击测试KW-BSE-22Hammer impact test for furniture坐具冲击摆锤

1600407838126452.jpg

 
6.27Drop tests(坐具)跌落测试 KW-GBF-32Universal drop or impact test for finished furiture test rig家具综合冲击(跌落)试验台

1600412381155436.jpg

 
KW-BFM-05-MSChair Rear Stability Test Disc坐具后稳定性测试加载模块

 
6.28Backward fall test(坐具)后跌测试NA//   
6.29Castor and chair base durability(坐具)脚轮耐久测试KW-BFM-09Chair swival test rig椅子旋转耐久测试机

 
KW-BFM-17Chair caster durablity tester椅子脚轮耐久测试机

 
6.30Rolling resistance of the unloaded chair脚轮不加载(状态下)摩擦阻力测试KW-BFM-24Drawer & silider durability tester直导轨耐久测试机

1600411711647684.jpg

 
7Test procedures - Work Chairs 测试方法 - 办公椅
7.1General一般要求NA//   
7.2Loading points加载点(确认)NA//   
7.3Combined seat and back static load test(办公椅)座背联合强度测试KW-BSE-23Seat and Back Bending Tester单座位坐背联合测试机

1600408046503426.jpg

 
7.4Seat front edge static load test(办公椅)座面前角强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
7.5Arm rest downward static load test – central(办公椅)扶手中间垂直强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
7.6Arm rest downward static load test – front(办公椅)扶手前端垂直强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
7.7Arm rest sideways static load test(办公椅)扶手侧拉强度测试KW-BSE-16Arm rest tester坐具扶手试验机

 
7.8Foot rest static load test(办公椅)脚踏强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
7.9Seat and back durability(办公椅)座背联合耐久测试KW-BSE-23Seat and Back Bending Tester单座位坐背联合测试机

1600408046503426.jpg

 
KW-BFM-38-2Two positions seat and back tester
二工位坐具综合试验机-前推式

 
7.10Arm rest durability(办公椅)扶手耐久测试KW-BSE-16Arm rest tester坐具扶手试验机

 
7.11Swivel test(办公椅)旋转耐久测试KW-BFM-09Chair swival test rig椅子旋转耐久测试机

 
7.12Foot rest durability(办公椅)脚踏耐久测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
7.13Castor and chair base durability(办公椅)脚轮耐久测试KW-BFM-09Chair swival test rig椅子旋转耐久测试机

 
KW-BFM-17Chair caster durablity tester椅子脚轮耐久测试机

 
7.14 Rolling resistance of the unloaded chair(办公椅)脚轮无负载摩擦阻力测试KW-BFM-24Drawer & silider durability tester直导轨耐久测试机

KW-BFM-24.jpg

 
8Test Procedures - Loungers 测试方法 - (户外休闲)躺椅
8.1General一般要求///   
8.2Seat and back static load test(户外躺椅)座背联合强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
8.3Additional seat and leg rest static load test(户外躺椅)座面和搁脚附加的强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
8.4Seat and back durability testNANA//   
8.4.1Seat and back durability test procedure(户外躺椅)座背联合耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
8.4.2Additional seat durability test procedure(户外躺椅)座背联合耐久附加测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
8.5Durability test on back rest mechanism(户外躺椅)座背联合强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
8.6Arm rest downwards static load test(户外躺椅)扶手垂直强度测试KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 
8.7Arm rest durability test(户外躺椅)扶手耐久测试KW-BSE-16Arm rest tester坐具扶手试验机

 
8.8Impact test(户外躺椅)座面冲击强度测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BFM-11Seating Impact Tester 座面冲击测试机

 
8.9Lifting test for mobile loungers(户外躺椅)把手提起耐久测试KW-BSE-17Universal test rig for EN furniture
多功能家具综合框架试验机

 
KW-BSE-24Bending test rig for seat back mechanism or front coner坐具交替耐久试验机

1600411711647684.jpg

 

上一篇:BS EN 1725:1998 Domestic furniture Beds and mattresses Safety requirements and test methods

下一篇:BS EN 581-1:2017 Outdoor furniture-Seating and tables for camping, domestic and contract use-Part 1

发表评论:

评论记录:

未查询到任何数据!

在线咨询

天博体育

天博体育

在线咨询

免费通话

24小时免费咨询

请输入您的联系电话,座机请加区号

免费通话

微信扫一扫

微信联系
返回顶部
天博体育官网_天博体育网址_天博体育网站 天博体育官网_天博体育网址_天博体育网站 天博体育官网-欢迎下载 天博体育-集团官网 天博体育-集团官网 天博体育-集团官网